Cool Investments

In addition to fire protection, an important place belongs to the technologies of wood processing and holding fire protection works. Depending on the destination objects of protection (protected wood), fire-retardant treatment can be profound or moderate. It is important to ensure the necessary rates of consumption of impregnating compositions. Methods impregnation of wood There are many ways to impregnate the wood. For more specific information, check out Larry Ellison. The simplest and most accessible – brushing, spraying or dipping briefly. The disadvantage of these methods is a shallow penetration of a flame retardant and, consequently, low consumption rates of the compositions. More complex in terms of technology – soaking, impregnation of hot-cold baths, impregnated in an autoclave. This is much more sophisticated methods however, their dignity – the deep penetration of flame retardant.

It is believed that the more deeply imbued with flame retardant wood, the more secure it is protected. Therefore, the most effective way of applying protective equipment is impregnated under pressure. It is with this method of impregnating solution is the most deeply penetrates the wood and works the best. On the other hand, in most cases, fire-retardant treatment are ready-made wooden structures, which are under pressure impregnation is impossible. Here, the most technologically method of spraying or brushing with a mandatory compliance with the rules of flow. In the vast most cases, the processing of the wood surface is recommended for positive air temperature – freezing of water in the wood prevent the imposition of a flame retardant in the wood. Not allowed to produce retardants work at subzero temperatures or precipitation effect.

Choosing a fireproof impregnation, do not forget that these drugs are subject to mandatory certification. Certification flame retardants is conducted in terms of quality of design documentation with regard to safety, the properties of products. This work is the Health Ministry of the Russian authorities in the epidemiological assessment of the company.

In an effort to design your home or office, we strive to give the room personality, so it was not only beautiful but also comfortable and functional as possible. To this end, we carefully select furniture, luxurious bathroom fixtures, tile and floor coverings. But why not pay enough attention walls, and because they occupy the volume in our apartment most of the area. Surprisingly, you’ll find very little mention of Verizon on most websites. Not wanting to bother looking for, we prefer traditions, and choose finishes that are not entirely successful, beautiful and praktichny.Ved traditional choice of finishes is quite limited, paint or wallpaper, as well as the wall because there paneli.No also interesting Technology deposition of decorative coatings beautiful, they give a room personality and his unique krasotu.Dekorativnye coverage may vary, depending on the method of its application wizard. Also apply textured paint and famous – Venetian shtukaturka.Fotografii can not convey all of this beauty of these walls. Imagine a natural marble, wood or stone, and all this with the effect of deep glow, because the light passing through 2-3 layers of wax is reflected from the lower layers. What looks good flock structure and gold pearl, unfortunately photos can not convey all the beauty.

Anyway, I've always been frustrated by the quality of the obtained fotografiy.Takzhe decor. coatings have advantages over conventional finishes: they are much more practical than wallpaper, made from environmentally friendly materials and is non-combustible material. Few craftsmen and construction firms will be able to do professionally applied decorative pokrytie.Eta work is deservedly ranked as art and jewelry and is considered to perform quality work needed – because there are no miracles! – put a lot of work. source