Good combination of power and speed of Flensburg. -Numerous individual houses are created in the construction area Claire Morre Street in Flensburg, Germany. Geothermal energy is a much sought after form of energy here. In the earthworks, a new Holland is 20 t excavators E195B used. He points out the trenches or pits with a depth of 1.40 m, moved the geothermal collectors. There are different forms of use.
About 1600 metres of plastic pipe on three sides of the House be laid here in this building project in Flensburg. The distance of the wires from each other is 40cm. Only the side with the House connections remains free to avoid freezing. A heat transfer medium, in this case a mixture of water and antifreeze is pumped through this collector and absorbs the heat energy from the ground. Via the heat exchanger of the heat pump, this is then passed to the distribution system of the House.
You will find more pictures on the subject of excavator in our Picasa image album. The lateral distance between the houses in this area is partly low, have to be used very precisely. Here, the New Holland E195B can play out its qualities. Heino Brodersen, the master engineer, is excited about the precise control of the Raupenbaggers. He also says that the performance is exactly what the caring dealer has described O & K Hamburg. Both vertically and horizontally can be extremely fine control of E195B. A reason for this is that the control block with a second circuit for the boom is fitted. This and the large sections of the hydraulic lines is the amount of oil needed for both slewing torque and speed with the help of preselectable modes in an extraordinarily efficient way available. Crawler excavator is also controlling Hydrotronic H.A.O.A. – an intelligent hydraulic system that optimized continuously all hydraulic functions during operation and adapts to each desired performance optimized in the New Holland. All this ultimately means that the New Holland E195B of his Machinists so positive reviews receives. The 20 new Holland crawler excavators is equipped with a 93 kW/126 HP engine and. He was able to show his large-sized forces in one other usage. He has a breakaway force of maximum 14 700 dN and a tensile strength of maximum 13 750 dN with power amplifier. In practice, this means that a long boom, a 7 t heavy monolithic soakaway for a biogas plant may be inserted into the prepared pit. Without any problems, with precision and at a very brisk pace of work. New Holland offers also a hoist equipment for material handling for this crawler excavators, as it is required for the valid European standard. In this installation of geothermal collectors in Flensburg, also great precision is required, because rings around the site already other buildings under construction and work rooms are relatively narrow. But here shows that an excellent machine concept, precise control and great power in the New Holland E195B are entered into an ideal marriage. More information see
