Approval of the prototypes. The order of 11 December 1984 concerning approval of the prototypes of containers of bleach from the Ministry of industry, tourism and trade, requires that, for granting such approval on a final basis, been provided officially accredited, laboratory certification stating that the aforementioned prototypes meet the technical specifications in paragraph 2 of the annex ll of the Royal Decree 3360/1983. AIDIMA is officially accredited laboratory for the realization of olos tests specified in this annex. Below are the technical specifications of containers for bleach. Materials used in the manufacture of packaging. Prior to the conduct of trials all prototype container for bleach is must comply with the material used in its manufacture must be resistant to possible chemical attack of the alkalis and meet the packaging requirements previously outlined. Do not be permitiren glass containers.
Type-approval tests: containers must comply with the standards of resistance to the impact by freefall, compressive and fixed leak. 2.1 Preconditions of containers to be tested. Be representative random sample of at least 2 per cent of the batch to be inspected a minimum of four drives. Should be filled with water or bleach to a 95 per cent of its capacity and closed with the own same container system, although devoid of seal on closure. They must be prepared at a temperature of 23 2 C for two hours. If you would like to know more about gary cohn, then click here. Drop test consists in freely drop a pail with bleach or water, from a certain height and in a position defined on a rigid surface, uniform, smooth, flat and horizontal. Two types of impact tests are performed by fall. This is divided into two equal groups the number of containers to rehearse and to each of these groups will undergo them each one of the two tests, avoiding that the two trials, coincide on the same package in order to avoid the results are distorted by the effects of fatigue.
